Edelbrock Roller Cam 2206 for BB

Print Thread

Edelbrock Roller Cam 2206 for BB #2379011 09/29/17 07:38 PM 09/29/17 07:38 PM
Joined: Jan 2003 Posts: 338 Montreal Quebec STROKIE OP enthusiast
STROKIE OP enthusiast Joined: Jan 2003 Posts: 338 Montreal Quebec	Actually running a 451 stroker (400 block 440 crank and 400 rods) Edelbrock performer rpm intake and heads into a Dodge Charger 1967 I'm planning to install roller cam Edelbrock 2206, I check the cam card: Duration (240° / 248° @ .050) Valve lift (.540'' / .545°) Lobe Seps 112° ICL 107 Any suggestion may too much cam for street and occasional strip. Thanks

Entire Thread
Subject	Posted By	Posted
Edelbrock Roller Cam 2206 for BB	STROKIE	09/29/17 11:38 PM
Re: Edelbrock Roller Cam 2206 for BB	ahy	09/30/17 01:45 AM
Re: Edelbrock Roller Cam 2206 for BB	STROKIE	09/30/17 02:01 AM
Re: Edelbrock Roller Cam 2206 for BB	451Mopar	09/30/17 05:29 PM
Re: Edelbrock Roller Cam 2206 for BB	Dcuda69	09/30/17 05:27 AM
Re: Edelbrock Roller Cam 2206 for BB	BSB67	09/30/17 01:42 PM
Re: Edelbrock Roller Cam 2206 for BB	STROKIE	09/30/17 03:39 PM
Re: Edelbrock Roller Cam 2206 for BB	6PakBee	09/30/17 05:14 PM
Re: Edelbrock Roller Cam 2206 for BB	STROKIE	09/30/17 09:41 PM
Re: Edelbrock Roller Cam 2206 for BB	451Mopar	09/30/17 11:56 PM
Re: Edelbrock Roller Cam 2206 for BB	STROKIE	10/01/17 01:43 AM
Re: Edelbrock Roller Cam 2206 for BB	MarkZ	10/01/17 05:57 PM

Hop To