I upgraded the front drum brakes on my 1970 Satellite to disk brakes. After that, I had the car aligned. Everything was out. I drove it about 7 miles and at low speeds (like 25 - 30 mph) when turning I'm getting tires squeal like you'd hear if the tire was very low or as if someone was doing a burn out. The wheel bearings are new so that can't be it. I thought maybe it was the alignment, but I had it aligned. Any suggestions on what it could be? The place that did the alignment said no parts needed to be replaced (I asked them to check the tie-rods because they looked a bit worn.) and they said they didn't need replacing. I jacked up the car and with hands on the wheel at 3 and 9 there is a slight bit of movement. No movement with my hands at 12 and 6 (which confirms new wheel bearings). After only 7 miles, to me, it looks like I have some positive camber. What the heck could be causing this? Thanks.