I measured the knurl on my 440sourse crank at 2.810 and the inside width of the retainerseal is 2.780 so there should be .015 contact on each side if my Eagle crank is the same.IDK!I measured with the retainer on a table up to the seal lip.The seal at the deck is 2.810 though so maybe I can shim that in.
ps:anyone have an Eagle crank to measure the knurl?Stock stroke.

Last edited by Clanton; 05/14/17 08:07 PM.
GOTBOOST!New improved with Victor heads.
http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/