Duplicating Factory Spot Welds - Recommended?

Print Thread

Re: Duplicating Factory Spot Welds - Recommended? [Re: 69ragtop] #227960 02/21/09 06:49 PM 02/21/09 06:49 PM
Joined: Feb 2004 Posts: 72 R REH member
REH member R Joined: Feb 2004 Posts: 72	I used a steel rod from the hardware store (as a punch) that matched the size of the original spot welds. Much better duplication then tig weld marks.

Entire Thread
Subject	Posted By	Posted
Duplicating Factory Spot Welds - Recommended?	69ragtop	02/17/09 10:10 PM
Re: Duplicating Factory Spot Welds - Recommended?	moparclown	02/17/09 10:21 PM
Re: Duplicating Factory Spot Welds - Recommended?	340SIX	02/18/09 04:41 AM
Re: Duplicating Factory Spot Welds - Recommended?	anlauto	02/18/09 10:58 PM
Re: Duplicating Factory Spot Welds - Recommended?	screamindriver	02/18/09 11:27 PM
Re: Duplicating Factory Spot Welds - Recommended?	340SIX	02/19/09 02:05 AM
Re: Duplicating Factory Spot Welds - Recommended?	anlauto	02/19/09 02:42 AM
Re: Duplicating Factory Spot Welds - Recommended?	Dodge Don	02/19/09 02:47 AM
Re: Duplicating Factory Spot Welds - Recommended?	anlauto	02/19/09 11:20 AM
Re: Duplicating Factory Spot Welds - Recommended?	340SIX	02/19/09 05:35 AM
Re: Duplicating Factory Spot Welds - Recommended?	anlauto	02/19/09 11:22 AM
Re: Duplicating Factory Spot Welds - Recommended?	HemiChallenger	02/19/09 11:55 AM
Re: Duplicating Factory Spot Welds - Recommended?	moepwr	02/19/09 05:19 PM
Re: Duplicating Factory Spot Welds - Recommended?	6pkaar	02/19/09 07:09 PM
Re: Duplicating Factory Spot Welds - Recommended?	smac77	02/19/09 09:16 PM
Re: Duplicating Factory Spot Welds - Recommended?	6pkaar	02/19/09 09:45 PM
Re: Duplicating Factory Spot Welds - Recommended?	smac77	02/19/09 09:51 PM
Re: Duplicating Factory Spot Welds - Recommended?	6pkaar	02/19/09 10:14 PM
Re: Duplicating Factory Spot Welds - Recommended?	Barnabas_Kriss	02/20/09 05:03 AM
Re: Duplicating Factory Spot Welds - Recommended?	5wndwcpe	02/27/09 01:08 AM
Re: Duplicating Factory Spot Welds - Recommended?	340SIX	02/19/09 05:01 PM
Re: Duplicating Factory Spot Welds - Recommended?	magnumcharger	02/18/09 12:36 AM
Re: Duplicating Factory Spot Welds - Recommended?	elitecustombody	02/18/09 05:15 AM
Re: Duplicating Factory Spot Welds - Recommended?	340SIX	02/18/09 05:00 PM
Re: Duplicating Factory Spot Welds - Recommended?	REH	02/21/09 10:49 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To