I just received a partial order from rock auto for my front end rebuild. The moog 8243a cam bolts and moog k408 regular bushings. The shank on the cam bolts fits through the bushing inner sleeve very loosely, like the next size up on bolt size would be more correct. A good 1/8 to 3/16 sloppy fit. This just doesn't seem right. Car is still together so I can't check existing setup.

I called moog tech and the blue prints for the parts show a clearance factor between bolt shank and bushing sleeve of .140. Wont this lessen the adjustment available and wont the control arm be able to move in and out .140 on the bolt? They say part blueprint unchanged for years and say parts are correct. Still, I think the fit should be tighter