I just got a new neutral safety switch from Year one. This is for a 69 dart gts with auto. It was to replace the original that I have. Nothing wrong with it really, I just wanted to upgrade my electrical. The main connector to the transmission is identical and the 2 wires run up to the bulkhead connector exactly the same as the one I have. Here is the problem, the brown wire that splits off from the taped wire harness has a push on clip that goes to the starter relay. The new one is way to short to reach the relay. It is only 7" long and my relay is up,near the battery tray and needs to be more like 18" or so. I called M and H and I seemed to have stumped him.
Does anyone know what's going on? Is my relay in the wrong spot? It doesn't seem like the relay would be close to the firewall but it would have to be for this wire to reach.