Decided to add and oil temp sensor after reading some things on here about partially filled blocks on the street....My idea was to add a T on the back galley where the oil pressure line is hooked up. Well I did that and it wasn't reading correctly, so it dawned on me that oil would not be moving by the sensor so it would likely just be the static oil. Duh. Anyway, I looked at the instructions and they are talking about installing it in the oil pan, which I prefer not to do...So I was thinking since the engine has Indy Heads, maybe it could be installed in conjunction with the external oiling on the back of the heads. Has anyone done this? I was thinking using a T on both oiling galley feeds with a line going to each head off and one of the T's would have the oil temp sensor and the other would have the oil pressure sensor. Any ideas? My other concern was would this mess with the oil pressure reading as it wouldn't be deadheaded in his new configuration?

Thanks in advance!