I have a few gauges in the car. oil and trans temp are just a couple. Once I get it on the road I will let ya know what the temps go to before I add the cooler. Can I use a B&M supercooler for oil cooler?
Look at a Hayden oil cooler... a trans cooler
wont flow enough... the diameter isnt big enough..
the one block I bought had a crack in a cyl.. I was
gonna just sleeve the one cyl but when I got around
to it I busted that cyl out to see it was a filled
block... the fill did shrink on it... dont know what
brand it was filled with.. it wasnt much but it sure
wasnt stopping a wall from cracking
