When doing a plenum repair on a Magnum motor...

Print Thread

Re: When doing a plenum repair on a Magnum motor... [Re: Baxter61] #2228355 01/06/17 01:23 AM 01/06/17 01:23 AM
Joined: Dec 2010 Posts: 1,035 Missouri U.S.A. 7 71yelladustr super stock
71yelladustr super stock 7 Joined: Dec 2010 Posts: 1,035 Missouri U.S.A.	Permatex high tack spray sealer if you are worried about it. Otherwise, nothing at all. Last edited by 71yelladustr; 01/06/17 01:40 AM. 392 gen III hemi on E-85 727 trans Dana 60 10.02@134

Entire Thread
Subject	Posted By	Posted
When doing a plenum repair on a Magnum motor...	Baxter61	01/06/17 03:44 AM
Re: When doing a plenum repair on a Magnum motor...	buildanother	01/06/17 03:57 AM
Re: When doing a plenum repair on a Magnum motor...	70Cuda383	01/06/17 04:53 AM
Re: When doing a plenum repair on a Magnum motor...	71yelladustr	01/06/17 05:23 AM
Re: When doing a plenum repair on a Magnum motor...	dsp	01/06/17 05:29 AM
Re: When doing a plenum repair on a Magnum motor...	Jim_Lusk	01/06/17 05:33 AM
Re: When doing a plenum repair on a Magnum motor...	HotRodDave	01/06/17 08:21 PM
Re: When doing a plenum repair on a Magnum motor...	Cudajon	01/06/17 08:39 PM

Hop To