Thanks to all for the input. I have welders and can handle that part of it. Was just looking for ideas and other's thoughts, which I got and is appreciated.

Grizzly,
I could weld it but they are hollow and what is left is already worn through on the drivers side.

Poorboy,
Sounds like you've done this more than once. The flat plate seems to be solid still. Do you fabricate from round stock or flat? A quick measurement looks like some 1/2" flat stock would work. Then grind the rounds in.

mopars4ever,
The previous repair was done when I bought it and always thought it was done poorly. While in there I plan on fixing some of those bad welds. I had found the bushing kits. The pins may be bolted on your 06, welded on my 99. Even though I never had the bushings on my 99, bought used in 01, Dorman list them for a 99. Don't know for sure the 99's came with them.

69 charger man,
I had seen those for the GM's and had the same thought as you, but will have to check a local supply to see if they would work dimensionally.

Stumpy,
Your're right. A quick google shows several autoparts chains carry them.