Originally Posted By BSB67
If you have not done so, double, or even triple check all of your measurements. I doubt that it is the pistons. Although it is certainly possible it is hard to believe an 0.008" difference between rods. That would be a little disappointing.


I did check everything twice and wrote it down, but just looking at my numbers today, I realize I didn't write down two numbers for the .016 piston. So I will double check that one today.
As for the .008 piston, got that same number twice. ALl the others I checked, got the same number or one within .001 the second time. SO I think I did it right...or at least consistently.