My motor is a 528 CI RB bock 10.1-1 with this cam

https://www.summitracing.com/parts/hrs-720152-08/overview/

The car is a 3800 LB 4 speed car with 2" headers and a 3.54 rear.

I am almost worried the intake is a high RPM piece while the cam is not large enough.

I want to have a torquey motor that will lay down a 10.99 quarter.

Any thoughts are welcome.

Edit: the intake runners were left OOTB, hopefully the torque peak will be lower than MW ports

Last edited by 65Fury440; 10/06/16 02:23 AM.