Originally Posted By cudatom
I used to wrap and use a cut off wheel. What a PITA.

Then I picked up a Summit hose cutter. Very simple, takes me about 2 minutes per end.

Many have stated they don't like the Summit fittings. That's all I have on my car. I used their hose and fittings. Theirs are the only fittings that I have been able to take apart and reuse if I cut the hose too long and need to trim more off.


Same here. One wrap with any masking tape and cut with this cutter.

Summit hose cutter.

Peel the excess masking tape off after you install the fitting.