Valve setting w/aluminum block and heads

Print Thread

Re: Valve setting w/aluminum block and heads [Re: BANDIT] #2126111 08/05/16 09:48 PM 08/05/16 09:48 PM
Joined: Aug 2006 Posts: 610 long time lurker, short time p... P PorkyPig mopar
PorkyPig mopar P Joined: Aug 2006 Posts: 610 long time lurker, short time p...	All aluminium? Set at .010 cold and check again once heated up.

Entire Thread
Subject	Posted By	Posted
Valve setting w/aluminum block and heads	BANDIT	08/06/16 01:43 AM
Re: Valve setting w/aluminum block and heads	PorkyPig	08/06/16 01:48 AM
Re: Valve setting w/aluminum block and heads	BANDIT	08/06/16 01:53 AM
Re: Valve setting w/aluminum block and heads	LaRoy Engines	08/06/16 01:52 AM
Re: Valve setting w/aluminum block and heads	DaveRS23	08/06/16 02:02 AM
Re: Valve setting w/aluminum block and heads	BANDIT	08/06/16 02:35 AM
Re: Valve setting w/aluminum block and heads	Cab_Burge	08/09/16 06:19 PM
Re: Valve setting w/aluminum block and heads	an8sec70cuda	08/09/16 04:52 PM
Re: Valve setting w/aluminum block and heads	Al_Alguire	08/09/16 06:04 PM
Re: Valve setting w/aluminum block and heads	fast68plymouth	08/09/16 09:25 PM
Re: Valve setting w/aluminum block and heads	BANDIT	08/09/16 09:26 PM
Re: Valve setting w/aluminum block and heads	Cab_Burge	08/10/16 01:03 AM
Re: Valve setting w/aluminum block and heads	fast68plymouth	08/09/16 09:32 PM
Re: Valve setting w/aluminum block and heads	RapidRobert	08/11/16 03:04 AM
Re: Valve setting w/aluminum block and heads	Skeptic	08/11/16 03:15 AM
Re: Valve setting w/aluminum block and heads	Cab_Burge	08/11/16 04:30 AM
Re: Valve setting w/aluminum block and heads	BANDIT	08/10/16 04:12 AM
Re: Valve setting w/aluminum block and heads	fast68plymouth	08/10/16 06:52 PM
Re: Valve setting w/aluminum block and heads	B G Racing	08/11/16 06:27 PM

Hop To