stripped thread on Holley outboard 2 bbl float bowl

Print Thread

Re: stripped thread on Holley 2 bbl [Re: superbeejim] #2121890 07/31/16 01:31 PM 07/31/16 01:31 PM
Joined: Mar 2005 Posts: 660 F fury4speed mopar
fury4speed mopar F Joined: Mar 2005 Posts: 660	If you do not have to use it again for the fuel level I have used JB weld , if you have any threads left or if the plug will tighten a bit JB weld will work or just buy another bowl.

Entire Thread
Subject	Posted By	Posted
stripped thread on Holley outboard 2 bbl float bowl	superbeejim	07/31/16 05:15 PM
Re: stripped thread on Holley 2 bbl	fury4speed	07/31/16 05:31 PM
Re: stripped thread on Holley 2 bbl	superbeejim	08/01/16 01:05 AM
Re: stripped thread on Holley 2 bbl	rustbuckett68	07/31/16 05:38 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	SlickRS23	08/01/16 06:43 AM
Re: stripped thread on Holley outboard 2 bbl float bowl	62maxwgn	08/01/16 03:03 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	superbeejim	08/01/16 03:42 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	JohnRR	08/01/16 05:12 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	JohnRR	08/01/16 03:04 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	62maxwgn	08/01/16 08:23 PM
Re: stripped thread on Holley outboard 2 bbl float bowl	JohnRR	08/01/16 03:05 PM

Hop To