Problems with 340 timing - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Problems with 340 timing

Print Thread

Re: Problems with 340 timing [Re: RapidRobert] #2102490 07/02/16 02:13 PM 07/02/16 02:13 PM
Joined: Nov 2004 Posts: 168 North Texas TheTieWrapKid OP member
TheTieWrapKid OP member Joined: Nov 2004 Posts: 168 North Texas	I took the distributor out. I was going to look it over and measure the shaft which was 3 7/8 inches mounting surface to end of shaft. Normal for a small block one. B engine is supposed to be 3.5 inches and RB at 4 inches.

Entire Thread
Subject	Posted By	Posted
Problems with 340 timing	TheTieWrapKid	06/28/16 04:43 AM
Re: Problems with 340 timing	RapidRobert	06/28/16 05:59 AM
Re: Problems with 340 timing	TheTieWrapKid	06/29/16 01:23 AM
Re: Problems with 340 timing	RapidRobert	06/29/16 02:06 AM
Re: Problems with 340 timing	TheTieWrapKid	06/29/16 02:20 AM
Re: Problems with 340 timing	RapidRobert	06/29/16 05:08 AM
Re: Problems with 340 timing	TheTieWrapKid	07/01/16 04:52 AM
Re: Problems with 340 timing	RapidRobert	07/01/16 05:10 AM
Re: Problems with 340 timing	Cab_Burge	07/01/16 07:46 PM
Re: Problems with 340 timing	DARTH V8Я	07/01/16 07:55 PM
Re: Problems with 340 timing	TheTieWrapKid	07/02/16 01:28 AM
Re: Problems with 340 timing	RapidRobert	07/02/16 01:41 AM
Re: Problems with 340 timing	TheTieWrapKid	07/02/16 02:05 AM
Re: Problems with 340 timing	RapidRobert	07/02/16 02:09 AM
Re: Problems with 340 timing	TheTieWrapKid	07/02/16 02:18 AM
Re: Problems with 340 timing	RapidRobert	07/02/16 04:56 PM
Re: Problems with 340 timing	TheTieWrapKid	07/02/16 06:13 PM
Re: Problems with 340 timing	TheTieWrapKid	07/23/16 01:04 AM
Re: Problems with 340 timing	TheTieWrapKid	07/23/16 01:18 AM
Re: Problems with 340 timing	RapidRobert	07/23/16 03:03 AM
Re: Problems with 340 timing	TheTieWrapKid	07/23/16 07:02 PM
Re: Problems with 340 timing	65dodgebob	07/23/16 08:46 PM
Re: Problems with 340 timing	TheTieWrapKid	07/24/16 05:27 PM
Re: Problems with 340 timing	JohnRR	07/25/16 05:11 AM
Re: Problems with 340 timing	TheTieWrapKid	07/26/16 03:34 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1