Poly urethane bushing problem

Print Thread

Re: Poly urethane bushing problem [Re: Darius] #2089584 06/10/16 12:02 PM 06/10/16 12:02 PM
Joined: Jul 2007 Posts: 3,712 Sacramento, Ca Darius OP master
Darius OP master Joined: Jul 2007 Posts: 3,712 Sacramento, Ca	According to the folks at Ride Tech in the late 07-early08 time frame ( when I bought the 4 link from RMS) they had a bad supplier . This supplier used what THEY called "powder metal" for the sleeve. They resolved that issue and have not had a problem since. They are sending me FREE replacements!! Driving modern convenience in classic beauty

Entire Thread
Subject	Posted By	Posted
Poly urethane bushing problem	Darius	06/06/16 05:55 PM
Re: Poly urethane bushing problem	68rrunner	06/06/16 08:25 PM
Re: Poly urethane bushing problem	BigBlockMopar	06/06/16 09:52 PM
Re: Poly urethane bushing problem	Jon @ Hotchkis	06/07/16 12:00 AM
Re: Poly urethane bushing problem	67autocross	06/07/16 03:04 AM
Re: Poly urethane bushing problem	jcc	06/07/16 05:13 AM
Re: Poly urethane bushing problem	Supercuda	06/07/16 05:42 AM
Re: Poly urethane bushing problem	Darius	06/07/16 02:00 PM
Re: Poly urethane bushing problem	Mopar Mitch	06/07/16 11:22 PM
Re: Poly urethane bushing problem	dart4forte	06/08/16 11:19 PM
Re: Poly urethane bushing problem	72Swinger	06/08/16 02:30 AM
Re: Poly urethane bushing problem	ntstlgl1970	06/08/16 05:27 PM
Re: Poly urethane bushing problem	Darius	06/10/16 04:02 PM
Re: Poly urethane bushing problem	jcc	06/10/16 04:46 PM
Re: Poly urethane bushing problem	Darius	06/11/16 03:18 PM
Re: Poly urethane bushing problem	jcc	06/11/16 03:58 PM
Re: Poly urethane bushing problem	67autocross	06/11/16 05:06 PM
Re: Poly urethane bushing problem	jcc	06/11/16 06:32 PM

Hop To