Even with an oe small starter I had to hit the starter cutout in the block with a carbide burr to make room on my 440 even with a 727 stock case.
Well 7 hours hours later the transmission is in. Did what you said and had to grind a little more on the starter cutout. It needs a little more but I put bolts in and tightened them up evenly and slowly and it went right in.
I will never buy another JW Ultrabell ever again. This was the worst experience ever and they are not cheap. And the lower engine mount hole had to be retapped to boot.
Thankyou for all your help.
