Quote:

Let me clear up a little what Im asking. Since the 73 up b bodies use the differnt k frame, isolator stuff, does anybody make a prefabbed connector? If not, any pics on how you fabbed your own?

Thanks




Sorry Von, don't have any pics but what I did on my '74 was to use 2X3 tubing and connect the vertical wall of the front sub frame to the vertical wall of the rear sub frame. To do this we had to cut out a section of the floor and weld the connector into the floor. Some of the connector will protrude into the rear floor pan but it connects the whole car together and is really strong.

I can blow your mind how I was able to get rid of the rear torsion bar X-member and use the early model b-body torsion bars if you like. (Might have pictures of this somewhere)

Last edited by torkrules; 01/30/09 05:28 PM.