Welded in mid-mount plate? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Welded in mid-mount plate?

Print Thread

Re: Welded in mid-mount plate? [Re: RO23J71] #2082729 05/30/16 11:22 AM 05/30/16 11:22 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I have the same tubes as Monte show but the sheetmeatal isnt welded in... at the time of the cert on this it certed to 7.50 EDIT I have 2" between the verticals and the engine/trans on the race car.. I have 2" on the pass side and 3"on the drivers side on the Rampage.. I moved the engine to the right a little for added foot room.. and 2" across the top to the cross bar Last edited by MR_P_BODY; 05/30/16 04:23 PM.

Entire Thread
Subject	Posted By	Posted
Welded in mid-mount plate?	RO23J71	05/29/16 11:49 PM
Re: Welded in mid-mount plate?	sgcuda	05/30/16 12:54 AM
Re: Welded in mid-mount plate?	MR_P_BODY	05/30/16 01:09 AM
Re: Welded in mid-mount plate?	Monte_Smith	05/30/16 07:17 AM
Re: Welded in mid-mount plate?	gregsdart	05/30/16 01:27 PM
Re: Welded in mid-mount plate?	RO23J71	05/30/16 02:17 PM
Re: Welded in mid-mount plate?	MR_P_BODY	05/30/16 03:22 PM
Re: Welded in mid-mount plate?	Monte_Smith	05/30/16 04:59 PM
Re: Welded in mid-mount plate?	W.I.N. Racing	05/30/16 08:05 PM
Re: Welded in mid-mount plate?	MR_P_BODY	05/30/16 10:33 PM
Re: Welded in mid-mount plate?	lockjaw-express	05/31/16 01:32 AM
Re: Welded in mid-mount plate?	MR_P_BODY	05/31/16 02:45 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1