Hello Guys,
Looking for some help with an electrical issue. Some facts first. 1970 Cuda, 440 with electronic ignition conversion. A Jacobs ignition coil p/n JAC 380672T, Mopar Chrome ignition control box, mopar ballast resistor, mopar electronic distributor with vacuum advance and electronic ignition wiring harness(Year One). The bulkhead connector #23 pin dark blue wire is melted on the engine side all the way to the NUMBER ONE SPLICE and interior side for about 2-3 inches. On the engine compartment wiring diagram for Barracuda, it appears to be the dark blue wire J2-16DBL and joins other dark blue wires at the NUMBER ONE SPLICE. The same wire is melted also at the steering column connector, bulkhead side only, steering column side connector is fine. Suggestions to fix the problem would be appreciated. Not sure how to post pics as format here has changed. Thanks in advance for your time.
Ray