Indy 426-1 heads what to expect - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Indy 426-1 heads what to expect

Print Thread

Re: Indy 426-1 heads what to expect [Re: biff426] #2071907 05/12/16 07:45 AM 05/12/16 07:45 AM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	Nope, uses all the stock style stands rockers and valve covers, bolt in replacement for stock heads. The exhaust valve is rotated upwards 1.5 degrees for valve to valve clearance for the 2.4" intake valve. I found that my piston to valve clearance was better than with my old heads. Dave

Entire Thread
Subject	Posted By	Posted
Indy 426-1 heads what to expect	biff426	05/11/16 04:24 AM
Re: Indy 426-1 heads what to expect	fbs63	05/11/16 02:16 PM
Re: Indy 426-1 heads what to expect	an8sec70cuda	05/11/16 02:21 PM
Re: Indy 426-1 heads what to expect	rickseeman	05/11/16 04:11 PM
Re: Indy 426-1 heads what to expect	Dragula	05/12/16 01:11 AM
Re: Indy 426-1 heads what to expect	quickd100	05/12/16 04:01 AM
Re: Indy 426-1 heads what to expect	biff426	05/12/16 04:14 AM
Re: Indy 426-1 heads what to expect	biff426	05/12/16 04:14 AM
Re: Indy 426-1 heads what to expect	LAD 524	05/12/16 10:31 AM
Re: Indy 426-1 heads what to expect	Defbob	05/12/16 12:40 PM
Re: Indy 426-1 heads what to expect	quickd100	05/12/16 11:45 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1