It appears I may be in a pickle and need your guys expertise opinions. I had planned on using a set of used callies ultra BBC rods for my 470 build and i had them in to the machine shop to check the specs on both the crank end and the piston pin end. And my machinist reported that my small end of the rods were .002 over on all 8 rods, and my actually pin size is .990. The rods are brass bushed and if need be ill have to rebush the small ends but id like to hear your opinions on this matter, and wondering what kind of clearance i can get away with.
Running a set of forged icon pistons with a slip fit pin if that helps.
Any and all help is always appreciated
Aaron