Innovate LM-1 O2 sensor problem

Print Thread

Re: Innovate LM-1 O2 sensor problem [Re: Hemi_Joel] #2065632 05/02/16 12:23 AM 05/02/16 12:23 AM
Joined: Oct 2003 Posts: 7,506 Az Crizila master
Crizila master Joined: Oct 2003 Posts: 7,506 Az	Originally Posted By Hemi_Joel I am using an inovate LM1 air/fuel meter but it has an error code 4 pump open. The instructions say to check the cable and do a heater recalibration, which I have done. Still the same error code 4, pump open. So I am thinking of replacing the O2 sensor. Is there commonly available sensor that I could pick up at a parts store rather than order one from inovate ? Or a better solution than replacing the O2 sensor? Thanks, Joel Did you check all your grounds? I think I have a good used spare if you are interested. Fastest 300

Entire Thread
Subject	Posted By	Posted
Innovate LM-1 O2 sensor problem	Hemi_Joel	05/01/16 04:28 PM
Re: Innovate LM-1 O2 sensor problem	sr4440	05/01/16 04:47 PM
Re: Innovate LM-1 O2 sensor problem	Scamp408	05/01/16 06:25 PM
Re: Innovate LM-1 O2 sensor problem	Hemi_Joel	05/01/16 10:57 PM
Re: Innovate LM-1 O2 sensor problem	L4staero	05/02/16 03:11 AM
Re: Innovate LM-1 O2 sensor problem	Crizila	05/02/16 04:23 AM

Hop To