Originally Posted By DrCharles
Originally Posted By DARTH V8R
Originally Posted By Leigh
I install the lifters in the block, mark a line on them with a felt tip and turn the motor over. If one or more don't rotate, I swap positions until they all do.

Solid advice right there thumbs


So that's with no pushrods or spring pressure at all?

Turn over - at cranking speed, or just by hand with a ratchet on the damper bolt?

thanks.

Just sitting on the cam with light oil, no spring pressure. Turned with ratchet. I got the tip from Jericogtx. I'm not that smart, just ask Jeff!