stock 440 damper length or depth

Print Thread

Re: stock 440 damper length or depth [Re: beecrazy] #2050558 04/09/16 06:50 PM 04/09/16 06:50 PM
Joined: Dec 2003 Posts: 2,042 Leucadia, Ca. V vdriver top fuel
vdriver top fuel V Joined: Dec 2003 Posts: 2,042 Leucadia, Ca.	Not accurate to a couple of thou, but just about 1 3/4". Other end of the tape is flat against the table. Balancer is from a '72 steel crank 440.

Entire Thread
Subject	Posted By	Posted
stock 440 damper length or depth	beecrazy	04/09/16 03:29 AM
Re: stock 440 damper length or depth	dart9ss	04/09/16 04:25 AM
Re: stock 440 damper length or depth	vdriver	04/09/16 10:50 PM

Hop To