edelbrock cnc victor max wedge heads

Print Thread

Re: edelbrock cnc victor max wedge heads [Re: mopar dave] #2042806 03/31/16 05:03 PM 03/31/16 05:03 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	I thought the Hughes rocker arms are 0.600" offset for the standard port victors? I think they might be pretty close to the intake port walls on the MW victors? I'd contact Hughes directly to see what they say?

Entire Thread
Subject	Posted By	Posted
edelbrock cnc victor max wedge heads	mopar dave	03/29/16 05:58 PM
Re: edelbrock cnc victor max wedge heads	Jeremiah	03/29/16 06:02 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/29/16 06:43 PM
Re: edelbrock cnc victor max wedge heads	AndyF	03/29/16 06:17 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/29/16 06:36 PM
Re: edelbrock cnc victor max wedge heads	Jeremiah	03/29/16 07:27 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/29/16 07:39 PM
Re: edelbrock cnc victor max wedge heads	Jeremiah	03/29/16 08:21 PM
Re: edelbrock cnc victor max wedge heads	Dodgeguy101	03/29/16 08:28 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 02:29 AM
Re: edelbrock cnc victor max wedge heads	Azzkikrcuda	03/30/16 02:35 AM
Re: edelbrock cnc victor max wedge heads	Cab_Burge	03/29/16 08:31 PM
Re: edelbrock cnc victor max wedge heads	GY3	03/29/16 07:15 PM
Re: edelbrock cnc victor max wedge heads	BradH	03/30/16 02:33 AM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 04:17 AM
Re: edelbrock cnc victor max wedge heads	AndyF	03/30/16 04:19 AM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 05:45 AM
Re: edelbrock cnc victor max wedge heads	AndyF	03/30/16 08:38 PM
Re: edelbrock cnc victor max wedge heads	BradH	03/30/16 06:05 AM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 06:15 AM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/31/16 12:30 AM
Re: edelbrock cnc victor max wedge heads	OhioGTX	03/30/16 02:14 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 03:18 PM
Re: edelbrock cnc victor max wedge heads	BradH	03/30/16 11:39 PM
Re: edelbrock cnc victor max wedge heads	d7cook	03/30/16 03:24 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 03:28 PM
Re: edelbrock cnc victor max wedge heads	CTD5.9	03/30/16 04:11 PM
Re: edelbrock cnc victor max wedge heads	LaRoy Engines	03/30/16 04:23 PM
Re: edelbrock cnc victor max wedge heads	MoParFish	03/30/16 04:25 PM
Re: edelbrock cnc victor max wedge heads	fast68plymouth	03/30/16 04:40 PM
Re: edelbrock cnc victor max wedge heads	MoParFish	03/30/16 06:31 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/30/16 06:50 PM
Re: edelbrock cnc victor max wedge heads	CTD5.9	03/30/16 07:28 PM
Re: edelbrock cnc victor max wedge heads	tboomer	03/30/16 07:36 PM
Re: edelbrock cnc victor max wedge heads	Cab_Burge	03/30/16 08:32 PM
Re: edelbrock cnc victor max wedge heads	70blackfish	03/31/16 12:39 AM
Re: edelbrock cnc victor max wedge heads	451Mopar	03/31/16 07:56 AM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/31/16 03:00 PM
Re: edelbrock cnc victor max wedge heads	451Mopar	03/31/16 09:03 PM
Re: edelbrock cnc victor max wedge heads	mopar dave	03/31/16 10:32 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To