Originally Posted By Tom Swope
Our design is the two lazer cut flanges that are welded together.
The available cast appearing external coating makes the part appear to be pretty close to the original rare piece. The numbers matching user probably would require an nos cast part but this kit was designed to be an economical option to fill a need not for the points correct application.
We have had good success over the years with these kits with no complaints other than a few on this board so we will continue with this design for our specific market. We are appreciative of those on this board that have supported us in the past with both their business and comments. Being a manufacturer of over 500 Mopar exhaust parts any input regarding our product(s) is very much appreciated.



I have to speak for Tom and his crew. I have the stock exhaust on my GTS 383 big block. The fit was great. Had a little difficulty putting the system on but I figured it out. Great workmanship and a great product. Cudos to Tom and his crew.


“So if it’s on the internet it must be true”

Abe Lincoln