I still don't think the intake is a big factor. Its basically an aluminum version of the stock 440 intake. I think you are very close to having the hood being able to close. Hoods bulge upwards for clearance The only concern from what I see is filter height and the 383 base. Don't have to disassemble the hood scoop door. Take off the filter, place the hood down and see what you got. Then put on filter w/o the air cleaner lid, see what you got for room. Just above the string "could" be ok. Hoods are not completely flat level to the fenders, especially your hood.
You can temporarily put on a small or standard air cleaner assembly if you want to run the car.