Originally Posted By turbo toad
Originally Posted By Monte_Smith
[quote=turbo toad]They use the thru bolts for the front pump assembly on the glide to mate the bell to the trans. So i would say yes they do all have the same bolt pattern.
Im in the process of test fitting my valiant for a glide now, and I have to figure out what im going to do about the trans cross member.
Incorrect.........JW is the ONLY one that uses the front pump bell bolts. Reid and ATI both use a flange on the case that the bell bolts to and they are NOT the same pattern between the two


Thanks Monte i stand corrected im using a JW ultrabell and thought they all bolted up the same way

Originally Posted By Ian, trany mount all i done is weld a 2 inch plate to the mount and bolts up fine with the std xross member[/quote


Ian do you happen to have any pics of your trans cross member
i will get a pic later today for you

1.37 60 ft [email]6.0@113[/email] [email]9.57@141[/email] 408 glide 3550lbs
new video http://www.youtube.com/watch?feature=player_embedded&v=Xvq3ZObywQE