Originally Posted By MuuMuu101
Originally Posted By RylisPro
What's the details on the engine Samy?! Very nice!
Gotta love an N/A Mopar smallblock!



408 stroker built by IMM.

Crank: Scat 4340 4"
Rods: Scat 4340 I-beams 6.123"
Pistons: Icon Forged Dish 4.030"
Camshaft: Custom Hydraulic Rollers by Comp Cam
Lifters: Morel
Timing Set: Double Roller
Oil Pump-Pickup-Pan: Milodon Road Race Pan and Pickup with Melling Pump

Heads: Engine Quest/IMM
Intake Valves: 2.02
Exhaust Valves: 1.60"
Rocker Arms: 1.6 Chromoly
Intake: Port-Matched Edelbrock LD4B
Carb: Holley 850 DP
Timing: 34 deg

Headers: TTI shorties

523 hp @ 6000 rpm and 522 ft lbs @ 4500 rpm.

Yes, I know, the intake is probably a tad on the small side.


For the first time out keep that rear sway bar totally DISCONNECTED.

Just unbolt the dog one link on one side. After some laps we can connect it on the lightest setting. I see if you like it. It's just two 3/4" bolts and nuts.

Were those dyno numbers done with those shorties or a set of dyno headers?