In the upper left you can see the square tube recievers we built...just like a trailer hitch only smaller....thats what keeps the front end stable..



Grill area showing tubing frame that holds the grill and fenders....



4 hood pins and 1 lower hood pin is all that holds the whole nose on the car...



Little more detail on the frame ....supports headlight bucket...my dad made new reciever plates ....I used the factory bumper brackets on mine....just slotted the factory holes out like a tuning fork...then used longer bolts.



Radiator stays mounted via a tubing frame across the rails and the upper rods to stabilize it....it doesnt even wiggle...