Porting Bits...Cut and Lifespan

Print Thread

Re: Porting Bits...Cut and Lifespan [Re: Baxter61] #1989327 01/12/16 04:33 PM 01/12/16 04:33 PM
Joined: Nov 2004 Posts: 2,495 Oregon City, OR Baxter61 OP top fuel
Baxter61 OP top fuel Joined: Nov 2004 Posts: 2,495 Oregon City, OR	So what normally causes the burr to skip off the iron? Too little RPM or too much?

Entire Thread
Subject	Posted By	Posted
Porting Bits...Cut and Lifespan	Baxter61	01/11/16 05:49 PM
Re: Porting Bits...Cut and Lifespan	Stanton	01/11/16 06:40 PM
Re: Porting Bits...Cut and Lifespan	Triple Threat	01/11/16 07:06 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 07:49 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:00 PM
Re: Porting Bits...Cut and Lifespan	dartman366	01/11/16 08:50 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/11/16 08:52 PM
Re: Porting Bits...Cut and Lifespan	HotRodDave	01/11/16 10:20 PM
Re: Porting Bits...Cut and Lifespan	FastmOp	01/11/16 11:44 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 12:03 AM
Re: Porting Bits...Cut and Lifespan	Hemi ragtop	01/12/16 12:02 AM
Re: Porting Bits...Cut and Lifespan	jake4cars	01/12/16 01:29 AM
Re: Porting Bits...Cut and Lifespan	markz528	01/12/16 05:04 AM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 06:28 AM
Re: Porting Bits...Cut and Lifespan	Baxter61	01/12/16 08:33 PM
Re: Porting Bits...Cut and Lifespan	MR_P_BODY	01/12/16 09:45 PM
Re: Porting Bits...Cut and Lifespan	Rapid340	01/13/16 02:54 PM
Re: Porting Bits...Cut and Lifespan	moparx	01/13/16 03:46 PM
Re: Porting Bits...Cut and Lifespan	mopar dave	01/13/16 06:50 PM

Hop To