Main Bearing clearance - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Main Bearing clearance

Print Thread

Re: Main Bearing clearance [Re: scatpacktom] #1981781 01/02/16 03:23 AM 01/02/16 03:23 AM
Joined: Oct 2007 Posts: 4,213 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,213 New York	This isn't technology. The suggested plain bearing clearance for a spinning journal was .001" per 1.000" of journal diameter 100 years ago. Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
Main Bearing clearance	scatpacktom	12/31/15 10:45 PM
Re: Main Bearing clearance	MR_P_BODY	12/31/15 10:55 PM
Re: Main Bearing clearance	Cab_Burge	01/01/16 01:13 AM
Re: Main Bearing clearance	sr4440	01/01/16 01:34 AM
Re: Main Bearing clearance	MR_P_BODY	01/01/16 01:36 AM
Re: Main Bearing clearance	dthemi	01/01/16 01:52 AM
Re: Main Bearing clearance	Leon441	01/01/16 06:38 PM
Re: Main Bearing clearance	dizuster	01/01/16 06:44 PM
Re: Main Bearing clearance	scatpacktom	01/01/16 08:21 PM
Re: Main Bearing clearance	justinp61	01/01/16 10:50 PM
Re: Main Bearing clearance	Monte_Smith	01/01/16 09:43 PM
Re: Main Bearing clearance	Leon441	01/04/16 01:51 AM
Re: Main Bearing clearance	scatpacktom	01/01/16 11:24 PM
Re: Main Bearing clearance	dthemi	01/02/16 12:36 AM
Re: Main Bearing clearance	justinp61	01/02/16 03:26 PM
Re: Main Bearing clearance	ccdave	01/02/16 10:02 PM
Re: Main Bearing clearance	polyspheric	01/02/16 07:23 AM
Re: Main Bearing clearance	dthemi	01/04/16 05:22 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1