Originally Posted By DaytonaTurbo
First, TBI should flow the same or more as the carb you would have chosen.

The FITech style throttle bodies appear to be close in height to a carb, about 4". An edelbrock victor intake is about 1/4" or so taller than a performer RPM intake, which guys are getting to fit with drop base air cleaners.

Daytona Turbo,

Thank you for the reply. That was my concern. I was looking at both the Fitech Go Efi 8 and then their MeanStreet Efi for 800hp (similar to the Go EFI 8, but without timing control and support for power adders - unneeded for my application). I *think* Ken said that the MeanStreet throttle body and the Go EFI 8 was 850CFM. They have a Multiport system coming out that is a 900CFM throttle body that wouldn't cost much more than their EFI 8 kit. I could be all backwards at this point witht he CFM numbers though.

Originally I was looking at Fast EZ Efi 2.0, but all the horror stories had me second guessing that option. Whether its due to installer error or something else, I'm not sure?