Broke an exhaust manifold stud on the collector end...

Print Thread

Broke an exhaust manifold stud on the collector end... #1957099 11/24/15 03:38 PM 11/24/15 03:38 PM
Joined: Jan 2003 Posts: 6,480 USA M Molloy OP master
Molloy OP master M Joined: Jan 2003 Posts: 6,480 USA	This is on my 300 SRT8 with catalytic converter problems... Grind flat and drill out, or are there other tricks? Looks like it's pressed in. I suppose I could heat it up and beat on it? Thanks for any suggestions. Last edited by Molloy; 11/24/15 03:38 PM.

Entire Thread
Subject	Posted By	Posted
Broke an exhaust manifold stud on the collector end...	Molloy	11/24/15 07:38 PM
Re: Broke an exhaust manifold stud on the collector end...	Mr.Yuck	11/24/15 07:54 PM
Re: Broke an exhaust manifold stud on the collector end...	SNK-EYZ	11/24/15 08:04 PM
Re: Broke an exhaust manifold stud on the collector end...	I_bleed_MOPAR	11/24/15 08:37 PM
Re: Broke an exhaust manifold stud on the collector end...	dvw	11/24/15 11:42 PM
Re: Broke an exhaust manifold stud on the collector end...	Car Nut	11/25/15 04:33 AM
Re: Broke an exhaust manifold stud on the collector end...	rowin4	11/25/15 05:17 AM
Re: Broke an exhaust manifold stud on the collector end...	Molloy	11/25/15 06:19 AM
Re: Broke an exhaust manifold stud on the collector end...	GomangoCuda	11/25/15 09:30 PM
Re: Broke an exhaust manifold stud on the collector end...	dvw	11/26/15 03:06 PM
Re: Broke an exhaust manifold stud on the collector end...	srt	11/26/15 05:15 AM
Re: Broke an exhaust manifold stud on the collector end...	DaytonaTurbo	11/26/15 03:20 PM

Hop To