Considering a Future Engine swap from a LA 360 w/ NP435 Manual Transmission to a 440 USING THE SAME NP435 Manual Transmission, in a 1974 W200 Powerwagon.
What extra parts are required? Along with a suitable 440, internal/external balance issues aside, Here is a Required Parts List as best I understand, but is this Complete/Correct?
1) BB Bellhousing and bottom cover
2) BB 143 Tooth Flywheel
3) BB 11-Inch Clutch
4) Rear Sump Oil Pan w/ Pickup
5) Center Dump Exhaust Manifolds
6) Small Diameter Pwr Brake Booster
7) Drill Crankshaft for Pilot Bushing (if cast or non-manual Trans crank)
8) Radiator with inlet/outlet correct for BB
9) Motor Mounts
10) Transmission Input Shaft? 1 1/8 Or 1 3/16 inch? 18-Spline, is that correct?
So, Is this List Correct/Complete?