Verifying TDC on a dampner (timing chain slack)

Print Thread

Verifying TDC on a dampner (timing chain slack) #1947676 11/08/15 08:17 PM 11/08/15 08:17 PM
Joined: Jan 2003 Posts: 8,154 New Mexico UCUDANT OP Troll Hunter
UCUDANT OP Troll Hunter Joined: Jan 2003 Posts: 8,154 New Mexico	I want to verify an old 340 dampner is accurate. I have a piston stop installed and the dampner stopped at 6 degrees BTDC when rotating clockwize and at 7.5 degrees ATDC when rotating counterclockwise, I know the chain has slack backward so do I call this good. I really want to rig a dial indicator into the holetobe certain. The timing chain and gears are new Last edited by UCUDANT; 11/08/15 08:19 PM.

Entire Thread
Subject	Posted By	Posted
Verifying TDC on a dampner (timing chain slack)	UCUDANT	11/09/15 12:17 AM
Re: Verifying TDC on a dampner (timing chain slack)	RapidRobert	11/09/15 12:33 AM
Re: Verifying TDC on a dampner (timing chain slack)	WILD BILL	11/09/15 12:48 AM
Re: Verifying TDC on a dampner (timing chain slack)	Cab_Burge	11/09/15 01:17 AM
Re: Verifying TDC on a dampner (timing chain slack)	RapidRobert	11/09/15 01:19 AM
Re: Verifying TDC on a dampner (timing chain slack)	UCUDANT	11/09/15 01:52 AM

Hop To