Quote:

Mopar has never released those drawings for some reason. Chevy Performance has blueprints in their books but Mopar doesn't provide us with dimensions. Something I've been complaining about for years. (obviously with little success!)



jsmopar9766,

If all you need drawing for is to mock up gaskets, I'd think with a good set of calipers you could get some decent nominal dimensions.

Here at work we have the VALIDATOR ! Its a big contraption the Incoming Inspection uses to varify that parts are to print. If I had a BB head, I'd run one through it for you. Ohnestly though, the tollerances on gaskets are huge, probably +/-.050". You can measure much better than that with a good set of 12" calipers.

If you can get me a hand sketch of just HALF the head(Its symetric, split between two center ex ports, so don't waste time measuring the whole thing) I can AutoCAD it for you. Im guessing you need a DXF file for the water-jet guy to cut material.

1972 Swinger 3.6L Pentastar
Diablo CMR tuner