made some progress today with the 13.5:1 410 build

Print Thread

Re: made some progress today with the 13.5:1 410 build [Re: sleepyhead416] #1941599 10/30/15 11:52 AM 10/30/15 11:52 AM
Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan	looks like 13.3 if the piston is .010 in the hole. should of only been .005 in hole. i still have to cc chambers to get an accurate compression spec. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 02:22 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 02:29 AM
Re: made some progress today with the 13.5:1 410 build	madscientist	10/30/15 02:52 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:13 AM
Re: made some progress today with the 13.5:1 410 build	RickRoss	10/31/15 02:52 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/31/15 03:42 AM
Re: made some progress today with the 13.5:1 410 build	B3422W5	10/30/15 02:59 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:15 AM
Re: made some progress today with the 13.5:1 410 build	B3422W5	10/30/15 09:04 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:57 PM
Re: made some progress today with the 13.5:1 410 build	PorkyPig	10/30/15 05:30 PM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/31/15 03:41 AM
Re: made some progress today with the 13.5:1 410 build	sleepyhead416	10/30/15 02:28 PM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:52 PM
Re: made some progress today with the 13.5:1 410 build	D-50	10/30/15 11:45 PM

Hop To