Originally Posted By RapidRobert
Originally Posted By Powerflow
I'll try to get to it this weekend and then give it a week or so to soak.
what liquid are you gonna use!


GOOD NEWS: I went outside earlier to tag the plug wires before removing them. Decided to see what happens if I put a socket on the crank pulley bolt. With hardly any effort, the pulley turned! I only moved it a few degrees but at least I know it turns.

Afterwards, I went rummaging in my cabinet and found some very old Marvel Mystery Oil (we're talking 20+ years). Does it go bad? Same question for kerosene(I've got that lying around also).

I'm on a budget so if I don't have to buy anything I already have it's a plus.

At this point, unless it's not a good idea because the stuff is so old, I think I'll put a little of my Marvel in each cylinder as a light lubricant.


Thanks again for your support.

Harold

Last edited by Powerflow; 10/18/15 07:49 PM.