Quote:

---

What most guys who are opposed to the look do, is use a push pull type of switch.

then you run the rod for the knob/switch through a small hole in whatver part you like.(a lense or behind the plate, or whatever)

Then, when not in use just unthread the rod, and put it in the glove box.

---

That is a great Idea.

I used a push/pull on Gina's car and was concerned about someone bumping it while we were driving on the street.

I used one of the existing hole in the bumper to put the rod through. If you have any it's an alternative to drilling into the body. I did have to ream it a little larger. But, if you take the rod out, you'll never notice.