Valve Lash Iski Solid Cam

Print Thread

Valve Lash Iski Solid Cam #1917866 09/23/15 02:02 AM 09/23/15 02:02 AM
Joined: Jan 2003 Posts: 84 melbourne australia R rtandy OP member
rtandy OP member R Joined: Jan 2003 Posts: 84 melbourne australia	Hi All, Hoping that someone can help with the propper valve clearances for an old Iski 505 cam I'm using in my 440. I've been told that it was sold as a kit in the early 70s and the kit consisted of cam, solid lifters, pushrods and adjustable rocker arms (they look similar to the factory ones used in the 273 la)I've had the engine running with the valves set at .023 but this is only an edjucated guess. It run fine with no noises but I would like to be sure that I am getting the most out of this set up. Thanks in advance Andy.

Hop To