big block E street heads and hyd roller cam question

Print Thread

big block E street heads and hyd roller cam question #1903715 09/01/15 08:17 AM 09/01/15 08:17 AM
Joined: Jan 2005 Posts: 193 Australia T Teamx OP member
Teamx OP member T Joined: Jan 2005 Posts: 193 Australia	Could anyone advise if it would be ok to run a small hyd roller cam with 150 on the seat springs on the E street Edelbrock heads. It says in the instuctions not for use with roller cams I think because the valve seats are made of a lesser different material. I would like to run theese heads as they have the smaller 75cc chambers and that will get the comp where it needs to be. Thanks

Entire Thread
Subject	Posted By	Posted
big block E street heads and hyd roller cam question	Teamx	09/01/15 12:17 PM
Re: big block E street heads and hyd roller cam question	AndyF	09/01/15 05:41 PM
Re: big block E street heads and hyd roller cam question	FastmOp	09/01/15 06:58 PM
Re: big block E street heads and hyd roller cam question	AndyF	09/01/15 07:34 PM
Re: big block E street heads and hyd roller cam question	Teamx	09/03/15 11:36 AM
Re: big block E street heads and hyd roller cam question	AndyF	09/03/15 05:50 PM
Re: big block E street heads and hyd roller cam question	Rob C	09/10/15 02:59 PM

Hop To