Good .030 383 piston for street application

Print Thread

Re: Good .030 383 piston for street application [Re: Plymouth273] #1891992 08/14/15 07:18 PM 08/14/15 07:18 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	Not much selection in off the shelf, stock stroke crank and rods, the KB162-30 would work for a mild street build. I don't know about the new one someone mentioned?

Entire Thread
Subject	Posted By	Posted
Good .030 383 piston for street application	Plymouth273	08/10/15 12:52 AM
Re: Good .030 383 piston for street application	Yellow Fever	08/10/15 01:52 AM
Re: Good .030 383 piston for street application	Plymouth273	08/14/15 03:54 PM
Re: Good .030 383 piston for street application	Ply72rr	08/14/15 11:07 PM
Re: Good .030 383 piston for street application	RapidRobert	08/10/15 02:11 AM
Re: Good .030 383 piston for street application	SomeCarGuy	08/10/15 06:52 AM
Re: Good .030 383 piston for street application	CompSyn	08/10/15 08:50 PM
Re: Good .030 383 piston for street application	65pacecar	08/13/15 05:06 PM
Re: Good .030 383 piston for street application	JohnRR	08/13/15 05:13 PM
Re: Good .030 383 piston for street application	Plymouth273	08/14/15 03:52 PM
Re: Good .030 383 piston for street application	1969ronnie	08/14/15 11:15 PM
Re: Good .030 383 piston for street application	JohnRR	08/17/15 06:42 AM
Re: Good .030 383 piston for street application	451Mopar	08/14/15 11:18 PM
Re: Good .030 383 piston for street application	JohnRR	08/17/15 06:44 AM
Re: Good .030 383 piston for street application	Chris2581	08/15/15 12:55 AM
Re: Good .030 383 piston for street application	Plymouth273	08/16/15 11:06 PM
Re: Good .030 383 piston for street application	elmor353	08/17/15 03:40 AM
Re: Good .030 383 piston for street application	JohnRR	08/17/15 06:46 AM

Hop To