Dana 60 Yoke ID Help - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Dana 60 Yoke ID Help

Print Thread

Re: Dana 60 Yoke ID Help [Re: NITROUSN] #188165 01/08/09 10:13 PM 01/08/09 10:13 PM
Joined: Jul 2005 Posts: 3,072 Farmland, IN Ludington1 OP master
Ludington1 OP master Joined: Jul 2005 Posts: 3,072 Farmland, IN	U-bolts so I know it's not the original. 3.5" was to the outside edges of the yoke... like a moron I didn't measure the inside edges and it is a PAIN to get to. Darren

Entire Thread
Subject	Posted By	Posted
Dana 60 Yoke ID Help	Ludington1	01/09/09 01:57 AM
Re: Dana 60 Yoke ID Help	NITROUSN	01/09/09 02:04 AM
Re: Dana 60 Yoke ID Help	Ludington1	01/09/09 02:13 AM
Re: Dana 60 Yoke ID Help	NITROUSN	01/09/09 03:10 AM
Re: Dana 60 Yoke ID Help	Ludington1	01/09/09 03:28 AM
Re: Dana 60 Yoke ID Help	NITROUSN	01/09/09 03:38 AM
Re: Dana 60 Yoke ID Help	NITROUSN	01/09/09 03:48 AM
Re: Dana 60 Yoke ID Help	Ludington1	01/09/09 03:50 AM
Re: Dana 60 Yoke ID Help	NITROUSN	01/09/09 03:56 AM
Re: Dana 60 Yoke ID Help	Ludington1	01/09/09 04:02 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1