Brake Prop Valve Detail Hardware Needed-Any Sources?

Print Thread

Re: Brake Prop Valve Detail Hardware Needed-Any Sources? [Re: ScottSmith_Harms] #1864091 07/05/15 02:03 AM 07/05/15 02:03 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms OP Mr Wizzard
ScottSmith_Harms OP Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Here is what the fuel line head marking looks like, both have serration teeth on the flat side of the molded in washer.

Entire Thread
Subject	Posted By	Posted
Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/05/15 06:01 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/05/15 06:02 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/05/15 06:03 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	John_Kunkel	07/05/15 08:54 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/05/15 11:44 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	John_Kunkel	07/06/15 08:24 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	RSNOMO	07/06/15 09:19 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	44D6PAKCUDA	07/06/15 09:42 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/07/15 12:13 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	44D6PAKCUDA	07/07/15 12:55 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/07/15 03:13 AM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	71redcuda	07/07/15 02:26 PM
Re: Brake Prop Valve Detail Hardware Needed-Any Sources?	ScottSmith_Harms	07/07/15 02:40 PM

Hop To