The plates for the LCAs were fabricated from scratch as they are simple parts, occasionallly you can also get them on ebay...
Firmfeel sells finished reinforced control arms:
firmfeel The inner fender braces can be obtained at xv-motorsports:
%20-%20Web%20Large%20Photo1.jpg)
xv-motorsports In my case we reinforced both ends of the bar with a flat piece of metal, the one above the shockperch hat to be fabricated to fit inside the brace. Without that the bar would only be welded to a relatively thin piece of metal, and wouldn't fulfill its full potential.
thomas
_____________________________________________
cuda blog
