Well my project chassis is coming together slowly, so time to start putting the final touches on the motor.

However, I am not a cam guru by any stretch, and a turbo cam is uncharted territory for me.

Street Strip use -
#3600 car
no converter yet - figuring 4200-4400
3.55 rear gear
33x21.5x15 tires


Mopar 4-bolt block
twin 76mm 4202
Indy EZ-325cnc heads 2.19x1.81 370cfm
Harland Sharp 1.5 roller rockers
8.5 to 1 comp
4.25 Stroke
4.385 bore
6.76 rods
Port injected EFI

Current idea is to keep the rpms under 6800prm and boost under 20psi

I am considering something like
.615/.615 lift
244/244 @ .050
110.0 centerline
114.0 Lobe Seperation