All,

I am working on setting the alignment for my Duster with the Hotchkis UCAs installed. I'm shooting for a performance street alignment, so I was trying to hit the Hotchkis specs of 1.5 degrees camber and 6-7 caster.

I could have sworn I put the rod ends in correctly in their UCAs to the directions, but I am only able to get 3 degrees caster on the passenger side and 5 or so on the driver's side.

Before I tear the front end apart, would 3 still be decent or do I really need to get it to have 6-7? and if so, how much should I turn the rod ends on the UCAs when they are out? I have to remove camber with the rear bolts because the front ones are pushed outboard as far as they go.

Thanks for any help!